|
|
Cadence AllegroCadence
|
[FPCB version] Precision thermometer + humidity sensor with digital I2C interface
Precision thermometer + humidity sensor with digital I2C interface
This is a 2-layer sensor FlexPCB with Sparkfun Qwiic connector for I2C connection to host controller, such as Raspberry Pi or similar. Flex PCB has provision for address setting resistors for both temperature and humidity sensors.
The "business" end of the flex PCB has footprints for DFN-packaged Texas Instruments TMP11X series digital temperature sensors such as TMP117 or TMP119 with accuracy <0.1°C and Sensirion AG SHT4X series digital humidity sensor. Flex length is 202 mm, width 7.6mm and thickness around 0.1mm + components height.
More details, photos, tests and code examples are public at https://xdevs.com/guide/xth/ page.
[FPCB version] Precision thermometer + humidity sensor with digital I2C interface
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
More by Illya xDevs.com
-
[FPCB version] Precision thermometer + humidity sensor with digital I2C interface
Precision thermometer + humidity sensor with digital I2C interfaceThis is a 2-layer sensor FlexPCB w...
-
sb103_shorts_copper
Low thermal copper shorting bar, similar mechanically to ESI SB103. External two binding posts such ...
-
Fluke 5700/5720/5730/5790 repair extender board
This is extender PCB for debugging, repair and adjustment use in Fluke calibrators, such as 57xx/55x...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
